Altex Rentals
Altex Tools and Equipment Rental
As a long-term fabricator and field service company, Altex has a large inventory of capital tooling available. At many times of the year, this equipment is available for rent. Please contact us for availability and for rates for the equipment listed. We hope to help you out in your tooling and equipment needs.
Bundle Pulling Equipment
| Equipment Name | Specification | Capacity |
| Wash Trailer | Heavy-duty hydraulic based mobile transport unit used to support and move heat exchanger bundles during extraction and installation operations. Can rotate the bundle 360 degrees for easy cleaning. | Up to 70,000 lb capacity |
| Self Propelled Bundle Buggy | Low profile bundle puller, can transport bundles around site. Low profile, can adjust up to 3 feet high. Converts to aerial if needed. | Up to 55,000 lb capacity at ground level and up to 20,000 lbs as aerial |
| Hydraulic and Manual Bundle Grapplers | Hydraulic gripping attachment used to securely lift, position, and transport exchanger bundles, avoids use of slings. Also comes in manual model. | Up to 70,000 lb capacity |
| Aerial Bundle Puller | Aerial based hydraulic puller used for the extraction and installation of heat exchanger bundles. | Up to 140,000 lb capacity |
| Truck Mount Bundle Puller | Avoids use of crane, truck can transport bundle on and off site. Can also handle components. | Up to 44,000 lb capacity and up to 22-1/2 feet in height |
Machining Equipment
| Equipment Name | Specification | Capacity |
| Cold Cut/Bevel Machine | Portable split frame machine | Up to 60" in diameter |
| Climax OD Mount | OD mount flange facers - portable units for re-surfacing and repairing flange surfaces | Up to 82" in diameter |
| Meridian ID Mount | ID mount flange facers - portable units for re-surfacing and repairing flange surfaces | Up to 120" in diameter |
| Climax Milling Table | Portable milling machine used for precision milling, surfacing and equipment repair. | Up to 49" travel |
Torque Equipment
| Equipment Name | Specification | Capacity |
| Hydraulic Torquing Equipment | Hydraulic torque wrench, power head and pumps which provide controlled torque output for critical bolting applications. | Up to 6 1/8" hex range |
Tensioning Equipment
| Equipment Name | Specification | Capacity |
| Hydraulic Tensioning Equipment | Hydraulic puller and nut rotating device used to elongate studs and accurately tighten nuts during tensioning operations. Can also include pump with load cell, feed and inter-connecting hoses. | Up to 2 Load Cell Complete - 1-1/8" - 1-3/8" Studs (and higher sizes up to 4" studs) |
Heat Exchanger Rental
To support temporary and emergency heat-transfer needs, Altex maintains a rental fleet of eight shell-and-tube heat exchangers, with heat-transfer surface areas ranging from 175 to 990 ft². Contact our team to discuss availability and find the right exchanger for your application.
|
Rental Fleet
June 2026
|
|||||||
| Exchanger Type | Size (sq ft) |
TEMA Type | Serial # | CRN | |||
| AB | BC | SASK | ONT | ||||
| Shell & Tube | 990 | 23-180 BEU/BJU | 13-1897 A | x | x | x | |
| Shell & Tube | 990 | 23-180 BEU/BJU | 13-1897 B | x | x | x | |
| Shell & Tube | 990 | 23-180 BEU/BJU | 20-3302 A | x | x | x | |
| Shell & Tube | 990 | 23-180 BEU/BJU | 20-3302 B | x | x | x | |
| Shell & Tube | 175 | 13-72 VEV | 18-2742 A | x | x | ||
| Shell & Tube | 175 | 13-72 VEV | 18-2742 B | x | x | ||
Request an Equipment Rental
Need equipment for an upcoming project? Complete the form below and an Altex representative will contact you regarding availability, pricing, and rental options.
